QA Report 15-8-2018

Althea L1 Development
1

I was able to repeat a couple of bugs with the dashboard and create issues on github for them. I also managed to find another bug or two, but I can’t nail them down yet.

One keeps occurring after about 15-30 minutes of run time: The UI just stops loading pages. The pages will either be blank or continue to show the load bar. Internet through the exit node persists and a reboot fixes it…sometimes.

The second issue occurred when I created a mesh loop in the mesh ports. It appears to have caused both router 3 and 1 to fail. They both became unresponsive in the UI and no internet, but wifi connections to them worked. Weird thing is that router 2 maintained the connection to the exit node on 13 and through router 1, so I’m not sure 1 really failed and I haven’t been able to replicate it.

Exit<--13--1--2
            \ |
              3

Issues Created:
Re-Register causes is_tunnel_working: false
Router Setting fields not updating

Nightly Builds @ 1PM Pacific

GL1300
Connection: LAN
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success

Network Settings Page Load: Success
Payments Page Load: Success

GL1300
Connection: WIFI
Mode: Gateway
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success

Network Settings Page Load: Success
Exit Nodes:
	test: green
		Register: Success
		Reset: Success
	apac: green
		Register: Success
		Reset: Success
	aus: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	bogota: Waiting for Contact
	borked: green
		Register: Success
		Reset: Success
	canada_east: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	us_west: green
		Register: Success
		Reset: Success
Payments Page Load: Success

N600-1,
Connection: LAN
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank (as a Router remains blank) 
Mesh Ports in use: 0
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success

Network Settings Page Load: permanent load bar
Payments Page Load: Success

N600-1,
Connection: WIFI
Mode: Gateway
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Success (Multiple External Neighbors)
Mesh Ports in use: 0
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success
Network Settings Page Load: permanent load bar
			    1 Reboot now loads fine.

Exit Nodes:
	test: green
		Register: Success
		Reset: Success
	apac: green
		Register: Success
		Reset: Success
	aus: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	bogota: Waiting for Contact
	borked: green
		Register: Success
		Reset: Success
	canada_east: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	us_west: green
		Register: Success
		Reset: Success
Payments Page Load: Success

N600-2,
Connection: LAN
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank (as a Router remains blank)
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success
	Loading in old input fields

Network Settings Page Load: Success
Payments Page Load: Success

N600-2,
Connection: WIFI
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success
Network Settings Page Load: Success
Exit Nodes:
	test: green
		Register: Success
		Reset: Fails to clear registration.
	apac: green
		Register: Success
		Reset: Success
	aus: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	bogota: Waiting for Contact
	borked: green
		Register: Success
		Reset: Success
	canada_east: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	us_west: green
		Register: Success
		Reset: Success
Payments Page Load: Success

N600-3,
Connection: LAN
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success
Network Settings Page Load: Success
Payments Page Load: Success

N600-3,
Connection: WIFI
Mode: Router
Firmware Install: Success
SSH Connection: Success
LAN Connection: Success
Neighbors Page Load: Blank
Router Settings Page Load:Success
	Wifi2Ghz Change: Success
	Wifi2Ghz Pass Change: Success
	Wifi5Ghz Change: Success
	Wifi5Ghz Pass Change: Success
Network Settings Page Load: Success
Exit Nodes:
	test: green
		Register: Success
		Reset: Success
	apac: green
		Register: Success
		Reset: Success
	aus: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	bogota: Waiting for Contact
	borked: green
		Register: Success
		Reset: Success
	canada_east: green
		Register: Region Locked
		Reset: Success (Cleared error msg)
	us_west: green
		Register: Success
		Reset: Success
Payments Page Load: Success
2

this is with the new nightly?

switching loops are bad news, don’t think we can do much about it.

3

Yes. Now I’m still not convinced it isn’t something on my end and not the routers themselves. I have yet to replicate it intentionally.

4

I’ll attempt to reproduce locally